Double Cartridge Seal are Recommended for Clean and dirty media application Seal can tolerate reversal pressure. Double Cartridge Seal is Standard for using where Corrosive Liquid are being Processed. These seals are independent of direction of rotation, pre assembled cartridge unit easy to install with different PCD’s pumps due to slots provided on gland plate and these seals can be offered in balanced and unbalanced configuration. Ronak Seals are the top manufacturer of Double Cartridge Seal in INDIA.
Double Cartridge Mechanical Seals are self cartridge units consisting of a shaft, sleeve, seal and gland plate. The unit is fitted on to the pump shaft as a built assembly, and no further fitting is required. They are supplied with various tapings to provide for flashing, cooling water injection and disaster control. The setting position of the seal is set by the cartridge design but the seal unit should not be screwed to the shaft.
| Shaft Dia | 20mm to 100mm (0.75" to 4") |
|---|---|
| Pressure | 12 bar |
| Temperature | -20°C to 200°C |
| Shaft Speed | 2900 RMP (max) |
Carbon, Sic, Ceramic, TC
EPR, Viton, Silicon, PTFE, Nitrile, Kalrez
SS 316, SS 304, Hast-C, Alloy-20
